Installation and initial operation
72800153 Markoprint XB4JET / XB8JET
Compact mounting bracket
The Multiline MX Compact mounting bracket is used to install the print head in the
Compact model. The print head and ink system are consolidated into a single unit.
Fig. 35: Mounting bracket Compact
The service unit is mounted on the lower leg of the mounting bracket.
Optionally, it can be mounted directly at the transport belt or on a separate floor support.
Ensure that the service unit is lower than the print head so that no ink can run back to
the head.
Seite 83 von 162
GB