Idesign; Create A Print Image - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

iDesign

iDesign

Create a print image

No print images can be created on the Markoprint XB4JET/XB8JET controller itself.
Print images can be created and processed with the iDesign software stored on the USB
stick. For this purpose, this must be installed on a commercially available PC (follow the
enclosed iDesign operating instructions).
The diagram below shows the operating surface of the iDesign software.
Save Cascade
Create
label arrangement
new label
Open existing Save label
label as
Add text
Add
counter
Add date /
time
Arrangement Add
on top of each
variable
other
Seite 97 von 162
72800153 Markoprint XB4JET / XB8JET
Add
Move pixel Delete
barcode selection
by pixel
Turn Ink
Add logo /
selection consumption
picture
through calculator
90°
Fig. 43: User interface iDesign
GB