iDesign
Activation XB8JET
The activation of 5-8-fold print heads is only possible with the iDesign Touch software
via Ethernet.
Otherwise the XB8JET can be handled like 2 XB4JET.
Every control system card must activate separate by using iDesign.
Always two data lines RS232, USB or Ethernet are required.
If required the Ethernet 5-fold Switch 72900492 can be used.
The start impulse and speed / encoder signal are forwarded to a second circuit board.
Setting for a 5-8-fold print head by iDesign Touch
The activation of 5-8-fold print heads is only possible with the iDesign Touch software
via Ethernet.
72800153 Markoprint XB4JET / XB8JET
Seite 100 von 162
GB