General
Cleaning and maintenance
There are no moving parts in the print head requiring regular maintenance.
However, for printing onto outer packaging (e.g. cartons, trays, sacks, etc.) it must be
expected that dust and fibre particles carried along are freed and adhere to the nozzle
plate of the print head. Over a period of time, this can lead to a worsening of the print
quality (see also
Fehler! Textmarke nicht definiert.).
If the contamination is too stubborn and cannot be removed by the rinsing
procedure, return the unit to our factory for expert cleaning. Please note that this
constitutes a service which entails costs, even during the warranty period.
Copyright
This manual is copyright protected and intended for internal use only.
Access to the manual by third parties, any form of duplication – fully or in part – as well
as utilisation and/or submission of the content is not permitted without the written
consent of the manufacturer, except for internal use.
Offenders will be liable for damages. Rights to further claims are reserved.
Chapter Fehler! Verweisquelle konnte nicht gefunden werden., page
Seite 10 von 162
72800153 Markoprint XB4JET / XB8JET
GB