Indicator Lights - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Operation

Indicator lights

Indicator lights at the controller
Symbol Function
Sensor-LED
1+2
3+4
Network-LED
Status-LED
When starting the system unit the progress of the starting process can be
monitored on the LED's. If errors occur during booting, an error code is
transmitted via the LED's and can be analysed in more detail.
 Chapter Boot LED messages, Page 127
Description
GREEN: Busy
YELLOW: Start signal present
RED: Failure
GREEN: O.K.
YELLOW: Busy
RED: Failure
GREEN: O.K.
YELLOW: Busy
RED: Failure
Seite 94 von 162
72800153 Markoprint XB4JET / XB8JET
Reason
Lights from start to print end
No print text
No encoder signal
Encoder is to fast
Connected
Data transfer
Ready
Prints
i.e. empty cartridge
GB