Boot Led Messages - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Appendix

Boot LED messages

During booting of the system progress can be determined by means of the LED.
If the system stops during booting the cause can be determined by means of the LED.
FC means flashing. An error can be determined on the basis of the number of flashes.
Status-LED
Sensor-LED
ye
rd
—
ye
—
ye
—
rd
rd FC:
rd FC:
ye
ye
ye
ye
ye
ye
gn
Description
ye Write 64MB memory
—
Read/ invert 64MB memory
rd Read/ test 64MB memory
—
Test ok / Load BootMain from SPI
ye Programming and start of BootMain
rd BootMain initialization
—
Fatal error
rd
Boot error 4x = SPI; 5x = GA; 6x = Displ; 7x = SD-Card;
8x = USB; 9x = RTC; 10x = Task
rd Init error 1x = Dev; 2x = FS; 3x= UsrCl
gn SD card read
gn Wait for stick
rd / gn No boot data
rd / —
Write 64MB memory
ye / gn
Booting from stick?
ye / rd
Copy from stick?
gn / —
Copy Ok
—
Main program loaded and started
Seite 127 von 162
72800153 Markoprint XB4JET / XB8JET
GB