Inserting / Remove The Hp Ink Cartridge - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Installation and initial operation

Inserting / remove the HP ink cartridge

With the printing process switched on, a print head electronics fault may arise.
Therefore:
Replace the cartridge only when the printing process is switched off.
Inserting the ink cartridge:
1. Remove the protective foil from the nozzle plate.
Use the ink cartridge as soon as possible after having removed the protective foil.
2. Before replacement of the cartridge, wipe the nozzle plate once with a lint-free cloth.
3. Insert the ink cartridge in the cartridge holder as illustrated.
4. Click the ink cartridge by lightly pressure at the end.
If a new ink cartridge is inserted, the cartridge counters must be reset. See in the
manual of iDesign software.
The correct place of an ink cartridge is also shown in the iDesign status menu.
72800153 Markoprint XB4JET / XB8JET
Seite 75 von 162
Fig. 27: Insert HP ink cartridge
Fig. 28: Fix HP ink cartridge
GB