Configuration Of The Print Technology - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Installation and initial operation

Configuration of the print technology

The Markoprint XB4JET/XB8JET can control the print technologies HP, LX and MX. The
Markoprint XB4JET/XB8JET has two channels, which provide a combination of the
different print technologies.
The configuration of the selectable print technologies is possible like shown in the
following list.
Configuration
of the
channels
1 – 2
HP – HP
HP – MX
MX – MX
MX – LX
LX – LX
LX - HP
The Markoprint XB4JET/XB8JET control system is configured to HP – HP standard by
the delivery and can customize to the desired configuration if needed.
Requirements

The print system is correct installed.

The print system is connected to the power supply.

The print system is connected to iDesign software
Instruction
In iDesign software under "Function" – "Settings" – "System" the print technology
of both channels can be changed.
Description
The system controls HP print head modules exclusively. Up to two print head
modules are selectable.
The system controls one HP print head module and one MX print head module.
The system controls MX print head modules exclusively. Up to two print head
modules are selectable.
The system controls one MX print head module and one LX print head module.
The system controls LX print head modules exclusively. Up to two print head
modules are selectable.
The system controls one LX print head module and one HP print head module.
Seite 92 von 162
72800153 Markoprint XB4JET / XB8JET
GB