Setup Screen 14: Modbus; Setup Screen 15: Date And Time - Graco ProControl 1KE Plus Instructions-Parts List Manual

Setup Screen Screen 14: 14: Modbus
Setup Setup Screen 14:
Use this screen to set your Modbus preferences
for ports 1 and 2. Note that ports 5 and 6 are used
as Modbus master devices for connecting to other
ProControl 1KE, Informer, or Graco Integrated Paint
Kitchen modules.
Modbus mode. Select off or Slave from
the menu options.
Turn off Modbus functionality if
not used.
Use ProControl 1KE as Modbus
slave device.
Enter or change the Modbus address.
Value is between 1 and 247.
Select serial port baudrate from the menu
options: 9600, 19200, 38400, 57600, or
115200.
Select serial port parity from the menu
options: NONE, ODD, or EVEN.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
3A6948A
Modbus
Modbus
Key Key Key
Setup Screen Screen 15: 15: Date
Setup Setup Screen 15:
Use this screen to set your date format, date, time,
and backlight timeout.
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Select your preferred date format from
the menu.
MM/DD/YY
DD/MM/YY
YY/MM/DD
Set the current date.
Set the current time.
Backlight timeout in minutes. Set zero to
disable backlight timeout.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Setup Screens
Date and and Time Time
Date and Time
Key
Key Key
53