Setup Screen 6: Pressure Transducer - Graco ProControl 1KE Plus Instructions-Parts List Manual

Setup Screen Screen 6: 6: 6: Pressure
Setup Setup Screen
Use this screen to specify your pressure transducer
and set its offset and slope.
Table 11 Table Table 11 11 Setup Setup Screen Setup Screen 6 6 6 Screen
Description Description Description Examples Examples Examples
Empty
With data
3A6948A
Pressure Transducer Transducer
Pressure Transducer
Key Key Key
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Select the correct pressure transducer.
• (None)
• 100 100 100 psi psi psi
2000 psi psi
• 2000 2000 psi
4500 psi psi
• 4500 4500 psi
Pressure transducer slope. This number
is a constant representing millivolts
per bar. The default matches the
selected pressure transducer. Operator
adjustable. Default value is "090.000".
Set the zero offset (the reading on
the gauge when no pressure is on the
system). Default value is "00.4500".
Select units.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Setup Screens
47