Control Method Considerations - Graco ProControl 1KE Plus Instructions-Parts List Manual

Control Method Considerations

Control Method Method Considerations
Control Control Method
The ProControl 1KE Plus software allows for multiple control methods, which are selected and configured on
the Setup screens. The control method you chose will determine the information and options available on
the Run Screens.
Control methods are selected on
Setup Screen 13: Control Method, page
1. The Control Method setup screen.
Table Table Table 1 1 1 Control Control Methods Control Methods Methods and
Selection Selection Selection Description Description Description and
Icon
Icon Icon
Monitor Monitor Monitor and
No active control. The system drives to the setpoint
immediately, and will not adapt to changes in pressure or
flow.
ADCM ADCM Only ADCM Only Only
An ADCM that is not configured with specific pressure
sensors, flow meters, or output controls has limited
capabilities on the run screen. However, all of the system
setup screens are still available for offline configuration.
Closed- - - Loop Loop Pressure
Closed Closed Loop
Drives to a fluid pressure target, and may monitor flow. The
system drives to the setpoint using the PID control. It will
not adapt to changes in flow.
32
Considerations
Considerations
52.
and Run and Run Screen Run Screen Screen Examples Examples Examples
and Typical and Typical Typical Application Application Application
and and Accumulate Accumulate Volume Accumulate Volume Only Volume
Pressure Control Control
Pressure Control
2. Select the icon for your control method.
The control method options are described in the
following table.
Only Only
Run Screen Run Run Screen Examples Screen Examples Examples
3A6948A