Graco ProControl 1KE Plus Instructions-Parts List Manual page 33

Selection Description and
Selection Selection Description Description
Icon Icon Icon
Closed- - - Loop Loop Flow
Closed Closed Loop
Drives to a fluid flow target. The system drives to the
setpoint using a PID control for pressure, which is targeting
from the PID control for flow.
Current Setpoint
Current Current
For testing and setup. The system drives to the current
output immediately.
Note
4–20 mA approximately corresponds to 0–100 psi
(0–6.9 bar) pilot air pressure.
Systems without the atomizing air control option do
not have a separate control to enable it. The setting
3A6948A
and Typical Typical Application Application
and Typical Application
Flow Control Control
Flow Control
Setpoint to to to Pilot Pilot Air Air Control Control
Setpoint Pilot Air Control
Control Method Considerations
Run Screen
Run Run
will remain on the screen. Leave the atomizing air
setpoint at 0 in that case.
Screen Examples Examples
Screen Examples
33