Setup Screens; Setup Screen 1: Job Target - Graco ProControl 1KE Plus Instructions-Parts List Manual

Setup Screens

Screens
Setup Setup Screens
The Setup Mode is used to set up a password (if
desired) and to set parameters for controlling and
monitoring fluid flow with the ProControl 1KE Plus.
Setup Setup Screen Setup Screen Screen 1: 1: 1: Job
The Job Target screen is used to monitor the range
of sprayed fluid per job. When a job is logged, and
Table Table 9 9 9 Job Table Job Target Job Target Target Examples Examples Examples
Description Description Description
Example with a minimum volume of
125 cc. The logged job was 115 cc, so
the alarm was activated.
Example with a range from 125 cc to
135 cc. The logged job was 138 cc, so
the alarm was activated.
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Job dispense alarm range.
3A6948A
Job Target Job Target Target
Job Job Target Job Target Screen Target
Key
Key Key
See Screen Navigation and Editing, page
information on how to make selections and enter
data.
the dispensed volume is outside the limit, the alarm
will be turned on. A limit value of 0 turns off the alarm.
Screen Screen Event Log Event Event
Job dispense alarm enable (
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Setup Screens
29, for
Log History Log History Screen History Screen Screen
Key
Key Key
).
43