Communication Options - Graco ProControl 1KE Plus Instructions-Parts List Manual

Installation
Alternate Alternate Flow Alternate Flow Flow Meter Meter and Meter
Installation Installation Installation
For application of fluid compatibility, alternate flow
meters or fluid regulators can be used with the
ProControl 1KE Plus. See
a list of optional Graco meters and regulators.
It is recommended that alternate meters or regulators
be mounted adjacent to the fluid panel to ensure
optimal control.
See Electrical Schematic, page 79
and signal connections to the 1KE Plus.
For alternate fluid regulators, connect a 5/32 in. OD
air tubing line from the fluid I/P transducer control
"out" port to the fluid regulator air control inlet port.
The pilot air line should not exceed 10 ft (3 m).
26
and Fluid and Fluid Regulator Fluid Regulator Regulator
Accessories, page 77, for
, for meter power

Communication Options

Options
Communication Communication Options
Graco Accessories are available to enable
communication with a Programmable Logic
Controller (PLC) or Personal Computer (PC).
• The Fiber Optic Converter (Graco Kit 24N978)
enables Modbus RTU communication with a
user-supplied PLC using a serial cable.
• The Fiber Optic-to-Serial Converter Module (Graco
Kit 24R086) includes the fiber optic-to-serial
converter and power supply inside of an enclosure.
See the Communication Kits instruction manual
(332356) for additional details.
The communication kits come with installation
and setup directions necessary for their
use with the ProControl 1KE Plus. See
Appendix A - Modbus Variable Map, page
registration details.
81, for
3A6948A