Icons - Graco ProControl 1KE Plus Instructions-Parts List Manual

ADCM Module

Icons

Icons Icons
As you move through the ProControl 1KE Plus screens, you will notice that most information is communicated
using icons rather than words to simplify global communication. The detailed screen descriptions in
Run Screens, page 34, and
also are provided, on this page and the next. Softkeys are membrane buttons whose function correlates with
the screen content to the immediate left of the button.
Membrane Keys Membrane Membrane
Press to toggle between Run Mode
and Setup Mode.
Error Reset: Use to clear alarm after cause
has been fixed. Also used to cancel data
entered and return to original data.
Up/Down Arrows:
Use to move between
screens or fields on a screen, or to increment
or decrement the digits in a settable field.
Softkeys:
Use varies by screen.
See column at right.
30
Setup Screens, page
Keys Keys
43, explain what each icon represents. Icon reference tables
Mode Selection.
selections ( Run Mode Selection, page
Enter Screen. Highlight data that can be edited.
Also changes the function of the Up/Down
arrows so they move between data fields on the
screen, rather than between screens.
Exit Screen.
Enter. Press to activate a field for editing or to
accept the highlighted selection on a menu.
Right. Move to the right when editing number fields. Press
again to accept the entry when all digits are correct.
Reset.
Reset totalizer to zero.
Job Log. Saves the current job log data, resets
totalizers, and initiates a new job logging cycle.
Softkeys
Softkeys Softkeys
Opens a menu of Run Mode
Exit data editing.
Start
Stop
34).
3A6948A