Surface Menu; General Information - AIRTRONICS SD-10G Operating Manual

surface MENU

The Surface menu is where all basic adjustments to the control surfaces of your model
are made. Adjustment Options include Reversing, Centering, End Point Adjustments,
Limits, and CCPM and Swashplate settings (HELI Model Type), in an easy-to-follow
spreadsheet format. Individual Adjustment Options can also be 'locked' to prevent
unwanted or accidental changes.
Surface menu Adjustment Options are the same for AERO, GLID, and HELI
Model Types. There are also several HELI Model Type-specific Adjustment
Options. These are noted in the section headers (HELI Model Type Only).

gEnERaL inFORMaTiOn

To access the Surface menu, turn the transmitter ON. From the Top menu, press the Navigation Pad 56 to highlight SURFACE,
then press the ENTER key to display the Surface menu.
Unless otherwise noted, all programming changes take effect immediately. From within any menu, press the END key
continuously to return to the Top menu.
Directional Arrows
Adjustment Options
If the Top menu is not displayed when you turn the transmitter ON, continuously press the END key until the Top menu
is displayed.
Directional Arrows: Indicates in which direction you can navigate through the Surface menu using the Navigation Pad.
Adjustment Options: Indicates which control surface options can be adjusted. Adjustment Options vary based on the current
Model Type.
Adjustment Options Lock: Indicates if the individual Adjustment Options are either Locked or Unlocked. When the padlock
is Open (Unlocked), Adjustment Values for that specific Adjustment Option can be changed. When the padlock is Closed
(Locked), Adjustment Values for that specific Adjustment Option cannot be changed.
Channel Assignments: Indicates the actual channel/control surface that the Adjustment Values affect. Channel Assignments
vary based on the current Model Type, specific Model Type selection options, and Channel Assignment options.
Adjustment Values: Indicates the current values for each of the Channel Assignment Adjustment Options. Highlight a specific
Adjustment Value, then press the YES/+ or NO/- keys to change its value.
Adjustment Values can be changed for all Channel Assignments unless otherwise noted. If an Adjustment Value cannot
be changed, three dashes ( --- ) will be displayed.
Navigating the Surface Menu
1) Press the Navigation Pad 3456 to highlight the Adjustment Value
that you would like to change. For example, if you would like to change
the CENT (Centering) Adjustment Value for CH02 AI (Aileron), highlight
the Adjustment Value adjacent to CENT and below 02 AI.
As you scroll through the Surface menu, the Directional Arrows will
change, indicating which direction you can move the cursor.
Adjustment Options Lock
Page 63
Surface Menu
Channel Assignments
Adjustment Values