AIRTRONICS SD-10G Operating Manual page 100

aero Flight Mode menu
4) Press the Navigation Pad 6 to highlight TH 4 EL>0%.
5) Press the YES/+ or NO/- keys to change the Throttle 4 Elevator mixing
percentage value.
The Throttle 4 Elevator mixing percentage value is a ratio of elevator
travel to throttle travel. For example, when the Throttle 4 Elevator
mixing percentage value is set to 10%, the elevator will travel 1/10th the
amount that the throttle travels. This mix is Linear.
TH 4 EL setting range is -100% to 100%. The default setting is 0%. When the percentage value is increased from 0% to
100%, elevator travel will increase in one direction in relation to increased throttle travel. When the percentage value
is decreased from 0% to -100%, elevator travel will increase in the opposite direction in relation to increased throttle travel.
The channel options displayed will vary based on Model Type and Model Type selection options currently selected. For
example, if your model features dual elevator servos, TH 4 LE (Left Elevator) and TH 4 RE (Right Elevator) percentage
values can be set separately.
Throttle to Rudder Mixing
The Throttle to Rudder Mixing function allows you to mix a percentage of rudder control with throttle control. When you increase
the throttle, the rudder will move right or left. The Throttle to Rudder Mixing function is typically used to reduce minor yaw changes
when increasing power. The amount and the direction that the rudder moves when the throttle is increased is adjusted by
changing the Throttle 4 Rudder mixing percentage value either positive or negative.
IMPORTANT The Throttle to Rudder Mixing function must be assigned to a Switch Position Number before it can be
Activated. For more information, see page 45.
1) Press the Navigation Pad 56 to highlight MIXING, then press the ENTER key to display the MIXING menu. The FLAPERON
sub-menu will be highlighted by default.
2) Press the Navigation Pad 6 to highlight TH 4 RU, then press the
ENTER key to display the TH 4 RU menu. The cursor will default to
COMMON>COM.
3) Press the YES/+ or NO/- keys to choose the desired COM or SEP
option as described previously.
4) Press the Navigation Pad 6 to highlight TH 4 RU>0%.
5) Press the YES/+ or NO/- keys to change the Throttle 4 Rudder mixing
percentage value.
The Throttle 4 Rudder mixing percentage value is a ratio of rudder travel to throttle travel. For example, when the
Throttle 4 Rudder mixing percentage value is set to 10%, the rudder will travel 1/10th the amount that the throttle
travels. This mix is Linear.
TH 4 RU setting range is -100% to 100%. The default setting is 0%. When the percentage value is increased from 0% to
100%, rudder travel will increase in one direction in relation to increased throttle travel. When the percentage value
is decreased from 0% to -100%, rudder travel will increase in the opposite direction in relation to increased throttle travel.
Page 100