Contrast (Lcd Menu Contrast) - AIRTRONICS SD-10G Operating Manual

SYSTEM MENU
Transferring Programming Data from PC to TX
1) Press the Navigation Pad 56 to highlight DATA TRANSFER, then
press the ENTER key to display the DATA TRANSFER menu. The
cursor will default to >TX 4 PC.
2) Press the YES/+ or NO/- keys to choose >PC 4 TX. PC (SEND) will
be displayed.
3) Press the Navigation Pad 6 to highlight the currently selected model,
then press the YES/+ or NO/- keys to select the model you would like
the programming data from your PC to be written to.
4) Press then ENTER key. DATA TRANSFER OK?>Y will be displayed.
5) Press the YES/+ key to begin the Data Transfer process. When the
Data Transfer process is completed the DATA TRANSFER menu will be
displayed, indicating that the data has been transferred.
All model-specific programming data, including the Model Name will
be transferred to the selected model number.
If there is a problem with the Data Transfer procedure, for example, if the SD-10G transmitter is not connected to your
PC, TIMEOUT ERROR will be displayed. If this occurs, press the any key to return to the Data Transfer menu.
If you want to go back and change the model or you don't want to transfer the model programming data for any reason,
press the NO/- or END keys.
Models transferred to the Memory Expansion Card (if installed), will be denoted with an 'M' (i.e. M21:SANWA-04).

19.cOnTRaST (LcD MEnU cOnTRaST)

The Contrast function allows you to change the contrast of the LCD Display to make it easier to read in all types of lighting conditions.
In general, increasing the contrast will make the LCD Display easier to read in bright sunlight and decreasing the contrast will
make the LCD Display easier to read in low light levels.
Adjusting Contrast
1) Press the Navigation Pad 56 to highlight CONTRAST, then press the
ENTER key to display the CONTRAST menu. The cursor will default to
LCD-CONTRAST>50%.
2) Press the YES/+ or NO/- keys to increase or decrease the
LCD-CONTRAST setting in 5% increments.
CONTRAST setting range is 0% to 100%.
Increasing LCD Display Contrast can drain the battery more quickly than using a decreased (lower) setting.
Page 56