F-Mode Copy (Flight Mode Programming Data Copy); F-Mode Delay (Flight Mode Delay) - AIRTRONICS SD-10G Operating Manual

heli Flight Mode menu

20.F-MODE cOpY (FLigHT MODE pROgRaMMing DaTa cOpY)

The Flight Mode Copy function allows you to copy the Flight Mode programming data from one Flight Mode to another Flight
Mode. This is convenient if you want to use two or more different Flight Modes on one model, but only need to change a few
Flight Mode programming values for the new Flight Mode. This allows you to use the Flight Mode programming data from the
first Flight Mode to use as a base to start fine-tuning the programming for the second Flight Mode.
You can only copy Flight Mode programming data from one Flight Mode to another Flight Mode within the same model.
To copy Flight Mode programming data from one model's Flight Mode to another model's Flight Mode, you must copy
the actual model programming data to the other model. For more information, see page 52.
Copying Flight Mode Data
1) Press the Navigation Pad 56 to highlight F-MODE COPY, then press
the ENTER key to display the F-MODE COPY menu. The cursor
will default to MASTER>F-MODE(N).
2) Press the F-MODE key to select the Flight Mode you would like to copy
the Flight Mode programming data FROM (MASTER). Select from
F-MODE (N, 1, 2, 3, or 4).
3) Press the Navigation Pad 6 to highlight SLAVE>F-MODE(N).
4) Press the F-MODE key to select the Flight Mode you would like to
copy the Flight Mode programming data TO (SLAVE). Select from
F-MODE (N, 1, 2, 3, 4, or ALL).
Selecting ALL will copy the MASTER Flight Mode programming data to the remaining four Flight Modes.
It's not possible to copy the Flight Mode programming data from one Flight Mode to the same Flight Mode. If you attempt
to execute this, SAME F-MODE?? will be displayed and the process will not execute.
5) Press then ENTER key. F-MODE COPY OK?>Y will be displayed.
6) Press the YES/+ key to begin the F-MODE Copy process. When the
F-MODE Copy process is completed the F-MODE COPY menu will be
displayed, indicating that the Flight Mode programming data has been
copied.
If you want to go back and change the Flight Mode or you don't want
to copy the Flight Mode programming data for any reason, press the
NO/- or END keys.

21.F-MODE DELaY (FLigHT MODE DELaY)

The Flight Mode Delay function allows you to program custom delays for each of the channel functions within each of the
separate Flight Modes. This function helps to prevent drastic changes in channel settings when switching between Flight Modes.
For example, if you are flying an aerobatic helicopter, you might have one Flight Mode set up for aerobatic flying and a second
Flight Mode set up for general sport flying. Within each of those two Flight Modes you might have programmed different Throttle
Curves. The Flight Mode Delay function allows you to program a Delay in the Throttle channel so that the transition to the different
Throttle Curves when you switch back and forth between Flight Modes is smooth.
If you program Flight Mode Delays for all five Flight Modes separately, you can program up to 10 different Delays for each Flight
Mode. If you are using fewer Flight Modes, you can program more than 10 different Delays for each of the Flight Modes that you're
using. You are able to program 50 different Delays in total. The Flight Mode Delay function can be programmed for each of the
channels you're using, and separate Flight Mode Delays can be programmed in both directions. For example, when switching from
Flight Mode N (Normal) to Flight Mode 1 and back from Flight Mode 1 to Flight Mode N (Normal).
Page 191