Programming Menu Structure Overview - AIRTRONICS MT-S User Manual

MT- S
Telemetry System with Sanwa Synchronized Link Support
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE

PROGRAMMING MENU STRUCTURE OVERVIEW

The MT-S features a PROGRAMMING screen that is accessed by pressing the ENTER key from either the STATUS screen or
the TELEMETRY screen.
The PROGRAMMING screen contains all of the MT-S's various Programming Menus, categorized into six different menus.
To access these menus, press the UP or DOWN keys to highlight the desired menu, then press ENTER key to open the
selected menu.
SETTING
D/R STEP
SPEED POINT
CURVE 4WS
F/S MOA
BASE AUX MIX
FUNC CODE
Some Programming Menus contain more sub-menus than those shown, and those sub-menus will vary depending
on the channel selected. For example, The FUNC>ST menu contains the TRIM menu, however, the FUNC>TH menu
contains the TRIM menu, in addition to Throttle-specific programming, such as the ALB, OFFSET and TH TYPE menus.
Navigating Programming Menus:
When you open a Programming Menu, the cursor will flash over the Channel/Options along the top of the Programming
Menu screen, which consists of either four channels (ST, TH, A1 and A2) or other options (CH, SET, etc.).
To Select the Desired Channel or Option - When the cursor is flashing over a channel or option, press the UP or DOWN
keys to highlight the desired channel or option you want to make programming changes to, then press the ENTER key to
select it. The cursor will stop flashing and the first Programming Value that can
be changed will be highlighted.
To Change Programming Values - After selecting the desired channel or
option, the cursor will stop flashing and the first Programming Value that can be
changed will be highlighted. Press the UP or DOWN keys to select the desired
Programming Value you want to change, then press the ENTER key. The cursor
will flash over the selected Programming Value. Press the UP or DOWN keys to
change the highlighted Programming Value.
To Select Another Channel or Option - At any time you want to select another
channel or option to make programming changes to, press the BACK key until
the cursor is flashing over one of the four channels or options. You can then press
the UP or DOWN keys to highlight another channel or option, then press the
ENTER key to select it.
To Select Another Programming Menu - Press either the ENTER key or the
BACK key so that no cursor is flashing. Press the UP or DOWN keys to highlight
the desired Programming Menu, then press the ENTER key to open it. You can then select the desired channel or option and
change the desired Programming Value as described above.
AUX MODEL
MODEL SELECT
MODEL NAME
MODEL COPY
MODEL CLEAR
OR
Press ENTER Key
TIMER
LAP LOGGER
INT ALERT SETTING
DOWN TELEMETRY SETTING
TELEMETRY
BIND
KEY ASSIGN
BUZZER
BATTERY
LCD
VR ADJUST
Channel/Options
Programming Values
Programming Menus
GENERAL
SYSTEM
17