Data Transfer (Model Programming Data Transfer) - AIRTRONICS SD-10G Operating Manual

SYSTEM MENU
3) Press then ENTER key. DATA RESET OK?>Y will be displayed.
4) Press the YES/+ key to begin the Data Reset process. When the Data
Reset process is complete the DATA RESET menu will be displayed,
indicating that the programming data has been Reset.
If you want to go back and change the model or you don't want to
Reset the model programming data for any reason, press the NO/-
or END keys.
Models stored on the Memory Expansion Card (if installed), are denoted with an 'M' (i.e. M21:SANWA-04).

18.DaTa TRanSFER (MODEL pROgRaMMing DaTa TRanSFER)

The Data Transfer function allows you to transfer programming data from the SD-10G transmitter to your PC and from your PC
to your SD-10G transmitter*. This allows you to back up model programming data, install saved model programming data back
onto your transmitter, or install SD-10G-specific model programming data that you've downloaded from the Internet. For example,
you can copy your current model's programming data to your PC, then email the data to your fellow modeler that flies the same
model. He or she can then copy that programming data to their SD-10G transmitter so that it can be used with their model.
*USB adapter cable and software required available separately. See your local Airtronics dealer for more information. Visit http://www.airtronics.net to download software
and check system compatibility and installation instructions.
IMPORTANT Prior to using the Data Transfer function, your PC must be turned ON, the Transfer Tool software must be
running, and the SD-10G transmitter must be connected to the PC using the USB adapter cable. One side of the USB adapter
cable plugs into a USB port on your PC and the other side plugs into the DIN connector on the back of the SD-10G transmitter.
Transferring Programming Data from TX to PC
1) Press the Navigation Pad 56 to highlight DATA TRANSFER, then press the ENTER key to display the DATA TRANSFER
menu. The cursor will default to >TX 4 PC. PC (RECEIVE) will be displayed.
2) Press the Navigation Pad 6 to highlight the currently selected model,
then press the YES/+ or NO/- keys to select the model you would like
to copy the programming data FROM to your PC.
3) Press then ENTER key. DATA TRANSFER OK?>Y will be displayed.
4) Press the YES/+ key to begin the Data Transfer process. When the
Data Transfer process is completed the DATA TRANSFER menu will be
displayed, indicating that the data has been transferred.
All model-specific programming data, including the Model Name will
be transferred to your PC.
If there is a problem with the Data Transfer procedure, for example, if the SD-10G transmitter is not connected to your
PC, TIMEOUT ERROR will be displayed. If this occurs, press the any key to return to the Data Transfer menu.
If you want to go back and change the model or you don't want to transfer the model programming data for any reason,
press the NO/- or END keys.
Models stored on the Memory Expansion Card (if installed), are denoted with an 'M' (i.e. M21:SANWA-04).
Page 55