Data Reset (Model Programming Data Reset) - AIRTRONICS SD-10G Operating Manual

SYSTEM MENU
4) Press the Navigation Pad 6 to highlight the lower model group dialog
box, then press the YES/+ or NO/- keys to select the group of ten
models you would like to copy the programming data TO.
It's not possible to copy the programming data from one model group to the same model group. If you attempt to execute
this, SAME MODEL?? will be displayed and the process will not execute.
5) Press then ENTER key. DATA COPY OK?>Y will be displayed.
6) Press the YES/+ key to begin the Data Copy process. When the Data
Copy process is completed the DATA COPY menu will be displayed,
indicating that the programming data has been copied.
All model-specific programming data, including the Model Names will
be copied to the selected model group.
If you want to go back and change the models or you don't want to copy the model programming data for any reason,
press the NO/- or END keys.
Models stored on the Memory Expansion Card (if installed), are denoted with an 'M' (i.e. M21:SANWA-04).

17.DaTa RESET (MODEL pROgRaMMing DaTa RESET)

The Data Reset function allows you to Reset model-specific programming data for each model back to the factory default settings.
Individual programming settings can be Reset to the factory default settings by pressing the YES/+ and NO/- keys at the same
time, however, this is time consuming if you want to change all of the selected model's programming settings back to default.
Using the Data Reset function makes doing this much quicker and more accurate, since nothing will be missed.
Although Model Type and Modulation are model-specific, the Data Reset function does NOT Reset them. This is useful
if you have two similar models, but different programming needs for each. For example, if you have two similar gliders
that use the same Model Type but different programming, you can copy the first model's programming data, using the Data
Copy function, then use the Data Reset function to Reset the programming data except the Model Type. This saves time by
not needing to re-enter the Model Type.
Resetting Model Data
1) Press the Navigation Pad 56 to highlight DATA RESET, then press the ENTER key to display the DATA RESET menu.
The cursor will default to the currently selected model.
2) Press the YES/+ or NO/- keys to select the model you would like to
Reset the programming data for.
IMPORTANT When you use the Data Reset function, ALL model-specific Flight Mode data, Surface Menu data, and
model-specific System programming, such as Switch Assignments, Model Name, Fail Safe settings, and Stick Switches will
be Reset to the factory default settings. Model Type and Modulation settings will NOT be Reset.
Page 54