Table of Contents
Advertisement
10
en | Operation
2
Operation
2.1
Alarm Tasks
2.1.1
Silence Alarms
If the system generates an alarm, press the touch screen and enter your passcode (Figure 1.3
Login screen, page 7). If the system accepts your user passcode, the touch screen shows the
first alarm, e.g. an external intrusion alarm (Figure 2.1 External Intrusion Alarm screen, page
10) and the latest alarm. Any trouble events in the system are not shown on this display.
Figure 2.1 External Intrusion Alarm screen
To silence the alarm, press Silence. If the system recorded more than one alarm, the screen
shows the first and last alarms. Press View More to see all current events in the event
memory. For more information about event memory, refer to Section View Event Memory, page
10.
2.1.2
Clear Alarms
After silencing an alarm, the user must clear the alarm. From the alarm screen (Figure 2.1
External Intrusion Alarm screen, page 10), press View More to open the View Event Memory
screen (Figure 2.2 View Event Memory screen, page 11). To clear the alarm, press Clear Events
.
2.1.3
View Event Memory
If the Information button on the Main Menu (Figure 1.5 Main Menu – screen 1, page 8) flashes
red or yellow, press the Information button to view the View Event Memory screen (Figure
2.2 View Event Memory screen, page 11). For additional event memory options, refer to
Section Event Memory, page 61.
2014.11 | 06 | F.01U.168.328
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH
Advertisement
Table of Contents
