Logging Off - Bosch MAP Control Center IUI-MAP0001-2 User Manual

MAP Control Center
Figure 1.3 Login screen
If the system does not recognize the passcode, the control center shows the Invalid Login
screen (Figure 1.4 Invalid Login screen, page 7). To empty the passcode field, press Clear
(the pencil eraser button). If an invalid passcode is entered ten
control center is locked for two minutes
Figure 1.4 Invalid Login screen
After the user enters a valid passcode, the touch screen shows the Main Menu (Figure 1.5 Main
Menu – screen 1, page 8 ).
See also
–
1.7 Logging Off
A user is logged off
–
–
1
Programmable value
Bosch Sicherheitssysteme, GmbH
, page 9
By pressing the exit button (Table 1.1 Navigation Bar description, page 9)
If there has been no user activity on the control center for two minutes
1
.
User Manual
System Overview | en
1
times in succession, the
1
2014.11 | 06 | F.01U.168.328
7