Adjust Volume / Brightness; Chime Mode On / Off - Bosch MAP Control Center IUI-MAP0001-2 User Manual

MAP Control Center
Figure 2.96 Manufacturer Authorization menu
2.8.10 Adjust Volume / Brightness
On the Service menu (Figure 2.65 Service Menu – screen 3, page 44), select Adjust Volume /
Brightness. Use the Adjust Volume/Brightness screen (Figure 2.97 Adjust Volume / Brightness
screen, page 59) to set the volume and brightness:
1.
2.
3.
Figure 2.97 Adjust Volume / Brightness screen
2.8.11 Chime Mode On / Off
When Chime Mode is On, opening the programmed door [a door in the local area (the area
where the control center is located)] causes the touch screen to beep once. Chime Mode is
active only if the system is disarmed.
Notice!
Chime Mode is not supported in the Control Panel area.
On the Service menu (Figure 2.65 Service Menu – screen 3, page 44), press Chime Mode On /
Off. The Chime Mode On/ Off screen (Figure 2.98 Chime Mode On / Off screen, page 60)
opens.
Bosch Sicherheitssysteme, GmbH
Press Volume or Brightness.
Press the + or – button to increase or decrease the volume or brightness setting.
Press one of the button bar buttons to exit from the screen.
User Manual
Operation | en 59
2014.11 | 06 | F.01U.168.328