Table of Contents
Advertisement
34
en | Operation
Figure 2.44 Change Schedule screen
See also
–
–
2.6.1
Arming an Area at a Pre-programmed Time
If the system has been programmed to arm an area at a specific time, the keypad emits an
interval tone when the alarm is activated and the Exit Delay screen (Figure 2.6 Exit Delay
screen, page 14) is shown. The Exit Delay screen indicates how much time you have to exit the
area before your presence triggers an alarm.
2.7
Status
The Status menu provides access to functions for viewing the system status. From the Main
Menu (Figure 1.5 Main Menu – screen 1, page 8), press Status, then select the status category
from the on-screen buttons (Figure 2.45 Status menu, page 34).
Figure 2.45 Status menu
2.7.1
View Area Status
From the Status menu (Figure 2.45 Status menu, page 34), press View Area Status. The View
Area Status screen (Figure 2.46 View Area Status screen, page 35) opens.
2014.11 | 06 | F.01U.168.328
Schedules, page 33
Schedules, page 33
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH
Advertisement
Table of Contents
