Table of Contents
Advertisement
60
en | Operation
–
–
Figure 2.98 Chime Mode On / Off screen
2.9
Internal Program
If the installer configured the system with internal programs, the user can enable or disable
those programs from the touch screen. On the Main Menu (Figure 1.6 Main Menu – screen 2,
page 9), press Internal Program. From the Internal Program Start / Stop screen (Figure 2.99
Internal Program Start / Stop screen, page 60), press a program's on-screen button to change
the program's state to either:
–
–
Figure 2.99 Internal Program Start / Stop screen
To sort or filter the list of internal programs, press the Sort / Filter button. The Sort / Filter:
Internal Program Start / Stop screen (Figure 2.100 Sort/Filter: Internal Program Start/Stop
screen, page 61) opens. Select a filter category from the list:
–
–
–
Then press the A - Z or Z - A button to select the sorting sequence.
For more information on searching, sorting, and filtering, refer to Section Searching and
Sorting / Filtering, page 11
2014.11 | 06 | F.01U.168.328
Off (
), or
On (
).
Disabled (
), or
Enabled (
).
List All Programs
List Inactive Programs
List Active Programs
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH
Advertisement
Table of Contents
