Table of Contents
Advertisement
50
en | Operation
For more information on searching, sorting, and filtering, refer to Section Searching and
Sorting / Filtering, page 11.
Figure 2.77 Sort / Filter Enable / Disable Device screen
2.8.4
Set Time and Date
On the Service menu (Figure 2.63 Service Menu – screen 1, page 43), select Set Time and Date.
Use the Set Time and Date screen (Figure 2.78 Set Time and Date screen, page 50) to set the
time and date:
1.
2.
3.
The 24-Hour button is inactive. It is a reminder that the hours range from 0 (midnight) through
23 (11 p.m.).
Figure 2.78 Set Time and Date screen
2.8.5
Walk Test
On the Service menu (Figure 2.64 Service Menu – screen 2, page 43), press Walk Test. The
Walk Test screen (Figure 2.79 Walk Test screen, page 51) identifies the available options:
–
–
–
–
2014.11 | 06 | F.01U.168.328
Press the date or time element to select the value to be modified.
Press the + or – button to increase or decrease the element's value.
Press the OK button when finished.
Start New Walk Test
Resume Walk Test (This button is not active until after the first test is completed.)
Start Seismic Test
Print Walk Test (This button is not active until after the first test is completed.)
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH
Advertisement
Table of Contents
