Table of Contents
Advertisement
MAP Control Center
2.7.3
Bypass / Unbypass Device
To arm the system, regardless of a particular device's status, the user can bypass that device.
Notice!
A device cannot be bypassed if the area containing the device is armed, there is an active
event in the system from the area containing the device, or if the device is in Walk Test.
For example, if a window contact is installed on a window that the user wants to leave open,
the user can bypass that window contact point. This allows the user to arm the system even
though the window contact point's status is Active.
Notice!
Bypassing a device only disables the device's ability to notify the security system of an alarm
or trouble event. Tamper events are still active in a bypassed device.
From the Status menu (Figure 2.45 Status menu, page 34), press Bypass / Unbypass Device.
The Bypass / Unbypass Device screen (Figure 2.59 Bypass/Unbypass Device screen, page 41)
lists the devices and displays whether each device is either:
–
–
Press a device's on-screen button to change its bypass status.
Figure 2.59 Bypass/Unbypass Device screen
To find a specific device, the user can search or sort the list. Press the Search button to show
the Search Bypass / Unbypass Device screen (Figure 2.60 Search Bypass / Unbypass Device
screen, page 42). Use the numeric, alphabetic, and command keys to enter a device's name.
The name appears in the Search Bypass / Unbypass Device field. Press the Enter button to
start the search.
Bosch Sicherheitssysteme, GmbH
Bypassed (
), or
Unbypassed (
).
User Manual
Operation | en
41
2014.11 | 06 | F.01U.168.328
Advertisement
Table of Contents
