Bosch MAP Control Center IUI-MAP0001-2 User Manual page 27

MAP Control Center
Figure 2.30 Select Exit Delay screen
–
–
Completing Add User
–
Notice!
Until all of the above steps are completed, the Add User button will be in lighter text.
Figure 2.31 Completed Add User screen
–
Bosch Sicherheitssysteme, GmbH
Press the OK button. The selected exit delay type appears in lighter text under the Select
Exit Delay button name.
When all buttons on the Add Control Center User screen (Figure 2.24 Add Control Center
User screen, page 24) show an entry in lighter text, press OK. The Add User screen opens.
When the entries are completed on the Add User screen (Figure 2.31 Completed Add User
screen, page 27), entries in lighter text should appear under the Enter User ID and Enter
User Name buttons.
A symbol should appear on either the Add Smartkey User or Add Control Center
User button.
Press the Add User button. The screen briefly shows the message Attention - Request
to: Add User Succeeded (Figure 2.32 Attention: Add User Succeeded, page 28). Then the
Users menu appears.
User Manual
Operation | en 27
2014.11 | 06 | F.01U.168.328