Manufacturer Authorization - Bosch MAP Control Center IUI-MAP0001-2 User Manual

58 en | Operation
Figure 2.94 Search Change / View Output State screen
To sort or filter the list of outputs, press the Sort / Filter button on the Change / View Output
State screen. The Sort / Filter Change / View Output State screen (Figure 2.95 Sort / Filter:
Change / View Output State screen, page 58) opens.
Press a button to select one of the following lists:
–
–
–
Figure 2.95 Sort / Filter: Change / View Output State screen
2.8.9 Manufacturer Authorization
From the Service screen (Figure 2.65 Service Menu – screen 3, page 44), press Manufacturer
Authorization. The Manufacturer Authorization screen (Figure 2.96 Manufacturer Authorization
menu, page 59) opens. The button displays a green check mark or red "X" mark indicating
whether or not the manufacturer user authorization is set. Press the Manufacturer
Authorization button to grant the security system manufacturer access to the system. This
authorization expires at the configured number of hours for which the manufacturer
authorization was set.
2014.11 | 06 | F.01U.168.328
List All Outputs
List "Off" Outputs
List "On" Outputs
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH