Bosch MAP Control Center IUI-MAP0001-2 User Manual page 21

MAP Control Center
Figure 2.19 2. Enter User Name - Alphanumeric keypad screen 2
–
–
–
–
Add Smartkey User
–
Figure 2.20 Add Smartkey User screen
Notice!
The next three steps are optional in the Add User procedure.
Bosch Sicherheitssysteme, GmbH
On the Enter User Name screen, press Enter User Last Name.
On the alphanumeric keypad screen, enter the user's last name. Refer to Table 2.3 Arming
indicators, page 15 for information about using the commands at the bottom of the
screen.
Press Enter to complete the entry. The user's last name appears in lighter text under the
Enter User Last Name button name.
Press Enter to complete the User Name entry.
To designate a Smartkey user, press Add Smartkey User on the Add User screen (Figure
2.13 Add User screen, page 18). The Add Smartkey User screen (Figure 2.20 Add Smartkey
User screen, page 21) opens.
User Manual
Operation | en 21
2014.11 | 06 | F.01U.168.328