Bosch MAP Control Center IUI-MAP0001-2 User Manual page 52

52 en | Operation
Then press the Walk Test button
Figure 2.81 Walk Test: Select Areas screen
To find a specific area to test, the user can sort the list. To sort or filter the list of areas, press
the Sort / Filter button. The Sort / Filter Select Area screen (Figure 2.82 Sort / Filter Select
Area screen, page 52) opens. Select a sorting option from the list:
–
–
The sorting starts and completes within a few seconds.
Figure 2.82 Sort / Filter Select Area screen
For more information on sorting and filtering, refer to Section Searching and Sorting / Filtering,
page 11.
From the Select Areas screen (Figure 2.82 Sort / Filter Select Area screen, page 52), if you
press All Points, an Attention screen opens (refer toFigure 2.83 Attention – Event
Communication is disabled during Walk Test, page 53).
2014.11 | 06 | F.01U.168.328
List All Areas A - Z
List All Areas Z - A
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH