Table of Contents
Advertisement
48
en | Operation
Figure 2.73 Sort By screen
See also
–
2.8.2
View Version Information
On the Service menu (Figure 2.63 Service Menu – screen 1, page 43), select View Version
Information. The View Version Information screen (Figure 2.74 View Version Information
screen, page 48) opens and shows:
–
–
–
Figure 2.74 View Version Information screen
2.8.3
Enable / Disable Device
Disabling a device effectively removes that device from the security system. The control panel
ignores all signals received from a disabled device. Only authorized users, such as installers or
security officers, can disable devices. For information on bypassing a device, refer to Section
Bypass / Unbypass Device, page 41.
On the Service menu (Figure 2.63 Service Menu – screen 1, page 43), press Enable / Disable
Device. The Enable / Disable Device screen (Figure 2.75 Enable/Disable Device screen, page
49) lists each device and its current state:
–
2014.11 | 06 | F.01U.168.328
Event History, page 48
the control panel's firmware version,
the control panel's hardware version, and
the control center's firmware version.
Disabled (
), or
User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH
Advertisement
Table of Contents
