Control Center Maintenance; Idle Screen; Logging In - Bosch MAP Control Center IUI-MAP0001-2 User Manual

6 en | System Overview
Figure 1.1 Control Center LEDs
1 – Green LED
2 – Yellow LED
3 – Red LED
1.4 Control Center Maintenance
If the control center housing is dirty, clean it with a soft dampened cloth. Do not use corrosive
or abrasive cleaners. Make sure that no fluid gets inside of the housing. To remove fingerprints
or dust from the LCD screen, use a soft cloth that you have dampened slightly with water.
1.5 Idle Screen
The control center shows the Idle screen (Figure 1.2 Idle screen, page 6) when it is not in
use. To use the system, touch the control center display.
Figure 1.2 Idle screen
1.6 Logging In
Use the Login screen (Figure 1.3 Login screen, page 7) to enter your passcode. The user
passcode is made up of a three-digit user ID (004–999) and a six-digit user code, which is
entered immediately after the user ID.
2014.11 | 06 | F.01U.168.328 User Manual
MAP Control Center
Bosch Sicherheitssysteme, GmbH