Balanced Body Contrology Manual page 10

PARTS LIST
DESCRIPTION
36" Wooden Pole
1/4" Black Kneeling Pad
Sitting Box
Footstrap
Extension Straps
Leather Straps
Leather Handles
Contrology Reformer Springs SPR9600
Contrology Springbar
Wooden Gear Block Stopper
* 86" Reformer: (Leather Straps P/N: 707-307, Carriage Block P/N:
607-555). 89" Reformer: (Leather Straps P/N: 707-308, Carriage
Block P/N: 607-556),
INSTALL THE CARRIAGE
Clean all the carriage wheels and the metal rail surfaces of
the frame. Carefully place the carriage into the frame with the
headrest facing away from the footbar.
INSTALL THE STRAPS
Install the handles clips onto the O-rings that are on the straps.
Place handles over the eye bolts behind the shoulder rests. Insert
the end of the leather strap with the Quick Link clip through the
caster (rough leather side is against the caster) as shown in
Figure A.
Figure A
12
PART NO. QTY
720-088 1
108-018 2
721-011 1
210-072 2
607-509 2
707-306 2
707-305 1 pair
4
623-518 1
950-294 1
Figure B
Guide the strap to the eye bolt on the underside of the carriage.
Connect the Quick Link clip to the eye bolt on the same side of
the carriage as shown in Figure B. Repeat on other side.
ATTACH THE SPRINGS TO THE UNDERSIDE OF THE
CARRIAGE
Attach one spring to one slot in the bracket on the underside of
the carriage as shown in Figure C. The open end of the spring
hook should be facing down. Repeat for other springs.
Figure C
INSTALL THE SPRINGBAR
Place the springbar with hook ends facing up into the gear angle
as shown in Figure D. Connect at least (1) spring to an eye bolt on
the springbar.
Figure D
CARRIAGE BLOCKS
The Carriage Block at the head end of the Reformer is installed
on the frame to limit the distance the carriage can travel, see
Figure E. There are two lengths: the Medium Carriage Block
comes with the 86" and Long Carriage Block comes with the
89" Reformer. Not intended, but can be used on 80" Reformers,
must purchase separately.
Figure E