Summary of Contents for Balanced Body Cadillac Trapeze Table
Page 1
How to Assemble the Trapeze Table (Cadillac) ʐ ʐ ʐ Top Slider Canopy Top Corner Connector Vertical Slider Trapeze Bar and Sling Springs ʏ Fuzzies Ơ Sliders Ơ with Pull Vertical Knobs Tube Assembly Cotton Ơ (Slider Bar Vertical Loops end) Tube Assembly...
Page 2
Each length of spring comes in different resistances. The standard Balanced Body spring coding is as follows: The Balanced Body Trapeze Table (Cadillac) consists of a padded table surrounded by a frame made of metal poles. Eyebolts in Short springs the frame provide attachment points for the springs.
Page 3
PARTS LIST (INCLUDED): ASSEMBLE THE TRAPEZE CANOPY 1. Using the provided 3/16" allen wrench, loosen the set screws DESCRIPTION PART NUMBER QTY. in each of the eight flange connectors mounted to the Ankle Velcro (pair) 101-001 outside of the frame. Remove the two vertical tubes from the Cotton Loop (pair) 101-005 box and the sliding push thru bar system.
Page 4
PTB directly downwards. The pins of the sliders should not come out of the holes. If the pins do not stay in the tube holes, the pull knobs need to be replaced; call Balanced Body for replacement parts.