Balanced Body CenterLine Reformer Assembling

Assembling the Balanced Body
CenterLine
A. Footbar B. Carriage C. Sitting Box D. Gondola Pole & Dowel E. Straps
DESCRIPTION
Gondola Pole
Short Box Dowel
Kneeling Pads
Sitting box
Cotton Foot Strap
Extender Straps
Leather Straps
Handles
Green Springs
No Roll Springbar
Detachable Shoulder Assembly
Detent Pin w/Lanyard
Screw with locking knob
Carriage Exension Stopper
INSTALL THE CARRIAGE
Clean all the carriage wheels and the metal rail surfaces of
the frame. Carefully place the carriage into the frame with the
headrest facing away from the footbar.
INSTALL THE STRAPS
Place strap handles over shoulder
rests. Insert the end of leather strap
with the black fabric through the
caster (rough leather side is against
the caster) as shown in Figure A.
Reformer
®
PART NO. QTY.
720-006
607-128
108-018
721-010
607-349
607-343
607-482
950-161 1 pair
SPR9360
607-323
N/A
N/A
N/A
200-211
Figure A: Straps and Carriage
Extension Stopper.
Guide the strap through the silver loop under the carriage as
shown in figure B. Depress the metal lever on the clip and guide
the black end of the strap through. It is important that the black
strap goes through the clip as shown in Figure C. Adjust until
strap is tight.
Note: straps would need to be adjusted if the springbar is moved
to a different gear.
1
1
Figure B
2
1
1
ATTACH THE SPRINGS TO THE
2
UNDERSIDE OF THE CARRIAGE
2
Attach one spring to each eye-bolt on
the underside of the carriage as shown
4
in Figure D. The open end of the spring
1
hook should be facing down.
2
2
2
INSTALL THE SPRINGBAR
2
Place the springbar with hooks facing up into
the gear block as shown in Figure E.
Figure E: Springs and Springbar.
®
Figure C: Metal clips for attaching straps
to under carriage.
Figure D: Springs at rest
Optional 5th Spring
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
Springbar
in gear
Contact Us
400-312 | 03.07.19