Advertisement
Quick Links
Assembling the Balanced Body
CenterLine
READ FIRST: IMPORTANT INSTALLATION NOTE
The CenterLine Pole System is designed to be mounted on a wall
with wood studs spaced 16" apart. Be sure the lag bolts go into
the studs. If your wood studs are not 16" apart, a 2x4 (stringer)
may be horizontally mounted to the wall into at least 3 studs.
The top of the Pole System can then be attached to the stringer
using the included lag bolts.
If you do not have wood frame construction,
consult a local hardware store or contractor.
PARTS LIST
PART DESCRIPTION
Curved Pole System Tower top
Pole System tube left
Pole System tube right
Pole System base plate
Wooden push-through bar
Maple roll-down bar
Safety strap and carabiner
Cotton loops
Long red springs with snaps
Green springs with snaps
Red springs with snaps
Blue springs with snaps
Grey springs with snaps
21 mm x 1/2 " wrench
Hardware package
Pole System
®
PART NUMBER
WLL0201
WLL0202
WLL0203
WLL0200
707-288
607-127
607-354, GEN9149
607-346
SPR9246
SPR9000
SPR9001
SPR9004
SPR9245
ALL0060
(see Figures A and B)
If you have ordered the complete Pole System package your
shipment will include:
» Mat (1)
» Moon boxes (2)
Flat Head Bolts GEN9473 (2)
Lag Bolts GEN9415 (4)
Washers GEN9204 (4)
Set Screws GEN9409 (2)
Hex Key GEN9282 (1)
QTY
1
1
1
1
1
1
1
2
2
Figure B:
12 of each: Eyebolt (GEN9086), nut 1/4"-20 (GEN9056) and 1/4" washer
1
(GEN9206)
1
2
2
1
TOOLS YOU WILL NEED (NOT INCLUDED)
» 7/16 wrench
» Screwdriver (to hold eyebolts in place while tightening)
®
» Weighted metal roll-up bar (1)
» 24" foot strap (1)
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
Figure A
Contact Us
400-353 | 10.07.16
Advertisement
Related Manuals for Balanced Body CenterLine Pole System
Summary of Contents for Balanced Body CenterLine Pole System
- Page 1 READ FIRST: IMPORTANT INSTALLATION NOTE If you have ordered the complete Pole System package your The CenterLine Pole System is designed to be mounted on a wall shipment will include: with wood studs spaced 16” apart. Be sure the lag bolts go into the studs.
- Page 2 ASSEMBLE THE POLE SYSTEM SECURE THE POLE SYSTEM INTO THE FLOOR 4. There are two 1/4” holes in LAY OUT ALL THE PARTS. the base plate to secure the Pole System to the floor. 1. Make sure you have all the components listed in the parts list. See Figure G.
- Page 3 Periodically check the machine for anything that might have become loose, such as the eyebolts where the springs attach. If you have a mat or moon box please note that Balanced Body upholstery has built-in antimicrobial/antibacterial protection. For light soiling use a solution of 10% household liquid dish soap with warm water applied with a soft damp cloth (do not use paper towels).
- Page 4 Contact Us 1-800-PILATES | +1-916-388-2838 pilates.com | info@pilates.com 400-353 | 10.07.16...