Product Configuration; External View; Name And Function Of Each Unit; Product External View - SAKI BF-Sirius Manual

2 Product Configuration

2.1 External View

Front View

2.2 Name and Function of Each Unit

This section describes names and functions of each unit.

2.2.1 Product External View

Here describes external view of the machine and function of each unit.
Top View
No. Name
BK01 Earth leakage breaker
EC04 Power Inlet
EC05 Power Outlet for PC
EC06 Power Outlet for LCD Monitor
LU01 Power Lamp
SW01 Main Breaker
SW02 Start Switch
SW03 Emergency Stop Switch
SW04 Reset Switch
PT01 Name Plate
800 mm
FFFure 2-1
SW04
SW03
SW02
FFFure 2-2
Circuit breaker for power supply connection and earth leakage.
AC power connector inlet.
A outlet to supply power for PC.
A outlet to supply power for LCD monitor.
Turn on the machine and the lamp lights on.
Breaker which regulates the power supply. POWER stand for main breaker.
Used in Auto Mode. Push this switch after unloading / loading PCB and start
scanning and inspection. START stand for start switch.
When the machine needs emergency stop, push this switch to stop inspection at
once. Enable the scan table to move manually.
EMERGENCY STOP stand for emergency stop switch.
Release the emergency stop status. RESET stand for reset switch.
Machine specification is described.
Table 2-1 Name and Function of Each Unit
External View
LU01
SW01
Front View
Product External View
Function
Operation Manual
1280 mm
Side View
BK01
EC05
EC06
EC04
PT01
Rear View
BF-Sirius
I-3