Board Settings And Motor Driver Settings - SAKI BF-Sirius Manual

Maintenance Manual

2.3 Board Settings and Motor Driver Settings

This section describes the board settings and motor driver settings.
WARNING
2.3.1 Image Processing Board
Switches on the image processing board has each own settings.
Dip Switch Setting
2.3.2 Option Signal Board
Switches on the option signal board has each own settings.
BF-Sirius
II-16
Board settings and motor driver settings should be set by Saki engineer. Do not change
the settings. Wrong settings may cause unexpected errors.
FFFure 2-5 Image Processing Board
SW0 SW1 SW2
OFF OFF OFF
Table 2-6
SW2
PASS
FFFure 2-6
Switch Setting
Table 2-7
ON
OFF
Item
SW3 SW4
OFF OFF
Dip Switch Setting
SW1
PASS
Option Signal Board
Item
SW1 SW2
Normal Normal
Switch Setting
SW5 SW6 SW7
OFF OFF OFF