Operation Manual
3.9.3 False Call Detection
Step1:
Start Auto Mode according to
which shows Waiting for Start and push the start switch. Image is scanned and inspected
automatically. If any components are detected, the dialog shown in Figure 3-35 appears.
Step2:
In
Input Repair Person's Name dialog, either type in the name of the operator or select
one from the list.
OK
Delete
NOTE
BF-Sirius
I-24
3.9.2 Inspection Method in Auto Mode. Confirm the display
FFFure 3-35
Input Repair Person's Name
Goes to the Step3.
Deletes the selected name from the list.
Input Repair Person's Name dialog will not be re-displayed if it is set once.