Machine Installation; Tools Required In The Installation Process; Unpacking And Installing The Machine; Items To Be Verified At Unpacking - SAKI BF-Sirius Manual

Installation Manual

1 Machine Installation

This chapter describes an installation procedures.
WARNING Check that the outlet FG terminal at the factory equipment is properly grounded at the installation.

1.1 Tools Required in the Installation Process

These are commonly used tools that should be on hand for installation.
These tools will also be required during machine maintenance or adjustment.
Hex Wrench
Phillips Screw
Driver

1.2 Unpacking and Installing the Machine

1.2.1 Items to be Verified at Unpacking

Before starting installation, check the items.
If any damaged or missing items are found, please contact Saki Corporation.
No.
1 Inpsection Machine
2 19-inch LCD Monitor
3 PC
4 Keyboard
5 Mouse
6 Mouse Pad
7 Power Supply Cord
8 Power Supply Cord for the System
9 Manual(This Manual and Programming)
10 System Backup Disc
11 Shading Sheet(Spare)
12 Backup Soft [Norton Ghost]
13 Fixing Plate(Scan table is secured by this plate before Shipment)
14 Wiring Cable
NOTE
BF-Sirius
III-2
Item
No.2
No.1
Table 1-1 Tools Required in the Installation Process
RS-232C Cable
Camera Link Cable(3 m)
DVI Cable
DisplayPort-DVI Conversion Cable
Table 1-2 Items to be Checked at Unpacking
The Commercially available softwares are subject to change without notice.
Usage Purpose and Description
For attaching and detaching external covers, attaching
internal parts, and performing adjustments.
Item Qty.
1
1
1
1
1
1
1
2
1 each
1
1
1
1
1
2
1
1