SAKI BF-Sirius Manual page 22

Operation Manual
Two kinds of the dialog as following appears according to the situation.
(i) Save the inspection data file for new PCB name or group name
OK
Cancel
(ii) Save the inspection data file of the same PCB name or the group name by
overwriting the exist data.
OK
Cancel
Step4: The dialog shown in Figure 3-23 appears. Select inspection data and press
NOTE
BF-Sirius
I-16
Makes an inspection data file in the predefined position and go to Step4.
Returns to the original inspection window without saving the data.
FFFure 3-21 Make New Data Files Confirmation
Saves the data by overwriting basis and go to Step4.
Returns to the original inspection window without saving the data.
FFFure 3-22 Overwrite Saving Confirmation
For default setting, save the inspection data in D:\BF1\BF1DATA.
FFFure 3-23 Select Inspection Data
OK.