SAKI BF-Sirius Manual page 11

No.
CP01 Circuit Protector
CP02 Circuit Protector
CP03 Circuit Protector
EC07 PLC
FN01 Rear Exhaust Fan
FN02 Rear Exhaust Fan
FN03 LED Cooling Fan
FN04 LED Cooling Fan
FN05 LED Cooling Fan
MC01 Scan Table
MC02 Reference Rail
MC03 Width Adjustment Moving Rail
MC04-01,02 Clamp Lever
MC05 ShadFnF Sheet
MC06-01,02 Filter
MD01 Scan Motor Driver
MR01 Scan Motor
NF01 Noise Filter
PB17 Option Signal Board
PB19-01 Image Processing Board 1
PB19-02 Image Processing Board 2
PB20 Extension Board
PB21-01 CCD Unit 1
PB21-02 CCD Unit 2
PB23 LED Driver Board
PB24 PLC Relay Board
PS01 DC 12V Power Supply
PS02 DC 5V Power Supply
PS03 DC 5V/24V Multi Power Supply
PS04 DC 24V Power Supply
TB01 Terminal Block
Name
Protected circuit of the PLC Relay Board. [SJEC1C009]
Protected circuit of the scan motor. [SJEC1C010]
Protected circuit of the PC and LED monitor. [SJEC1C012]
Controls the mechanical motion of the machine. [SJEC1P013]
Exhaust heat from inside of the machine. [SJ24EH031]
Exhaust heat from inside of the machine. [SJ24EH033]
Cooling LED illumination unit. [SJ24EH035]
Cooling LED illumination unit. [SJ24EH037]
Cooling LED illumination unit. [SJ24EH039]
This table moves when scanning.
Provides a reference position when a PCB is loaded.
Adjusts the position according to the PCB width to be loaded.
Used when adjusting the rail width.
A white sheet that provides a brightness frame of reference during the
automatic light adjustment process. [SJ10OP800]
Filter of air intake. [SJMR7R008]
Sets / Controls the scan motor. [SJMR2R011]
During scanning, this motor moves the scan table. [SJ24EH041]
Filters out noise from the input AC power supply. [SJEC1N012]
Relays the signals to the PLC. [SJPB2GA00]
Performs signal conversions so that images scanned by the right side CCD
Unit can be transferred to the PC. [SJPB1GA00]
Performs signal conversions so that images scanned by the left side CCD
Unit can be transferred to the PC. [SJPB1GA00]
Synchronize the image signals from Image Processing Board 1 and 2.
Transfer scan image to the PC. [SJPB1HA00]
Scans the inspection image of the right half. [SJPB2AA00]
Scans the inspection image of the left half. [SJPB2AA00]
Controls DC24V power supply to the LED illumination unit and its lighting.
[SJPB2RC00]
Relays the signals to the PLC. [SJPB2FB00]
Convert AC power supply into DC 12V. [SJEC1P004]
Convert AC power supply into DC 5V. [SJEC1P005]
Convert AC power supply into DC 5V/24V. [SJEC1P013]
Convert AC power supply into DC 24V. [SJEC1P014]
Distribute AC to each DC power supply.
Table 2-2 Name and Function of Each Unit
Operation Manual
Function
BF-Sirius
I-5