Position Of Sensor Units - SAKI BF-Sirius Manual

Operation Manual

2.2.3 Position of Sensor Units

Here illustrates and describes the position and functions of sensor units of internal machine.
SR05
SR04
SR01
SR02
Bottom Layer View
No.
SR01 Scan Origin Sensor
SR02 Front Scan Limit Sensor
SR03 Board Sensor
SR04 Scan Start Sensor
SR05 Rear Scan Limit Sensor
SS01-01/02 Area Sensor
SS02-01/02 Fiberoptic Sensor
SA01 Fiberoptic Sensor Amplifier
BF-Sirius
I-6
SS02-02
SR03
FFFure 2-4 Potision of Sensor Units
Name
This sensor determines the origin of the scan table. [SJ03PE014]
When this sensor is sensed, the scan motor stops, beyond which the scan
table cannot move any further frontward. [SJ03PE014]
A sensor that detects whether a PCB is set in the correct position.
[SJ24EH025]
When this sensor is sensed, start scaning. [SJ03PE014]
When this sensor is sensed, the scan motor stops, beyond which the scan
table cannot move any further rearward. [SJ03PE014]
Senses whether a hand or an object is caught in the inlet and outlet of PCB.
01 is transmitter. 02 is receiver. [SJ24EH027]
Senses whether a hand or an object is caught in the inlet and outlet of PCB.
01 is transmitter. 02 is receiver. [SJSS5K001]
Controls the fiberoptic sensor. [SJ24EH060]
Table 2-3 Name and Function of Each Sensor
SA01
SS01-02
Function
SS01-01
SS02-01