SAKI BF-Sirius Manual page 67

0603 mm (0201 in.) packages and up, Diodes, Tantalum capacitors, Aluminum electrolytic
capacitors, Module chips, Transistors, Power transistors, MELF resistors, Filters, Special-
Inspectable
shaped components, Connectors (0.4 mm pitch and up), QFP (0.4 mm pitch and up),
Components
SOP, CSP, BGA, Adjoining components (gap: 0.2 mm and up), and Solder joints viewable
from vertical top
Presence / Absence, Misalignment, Tombstone, Reverse, Polarity, Bridge, Foreign material,
Inspection
Absence of solder, Insufficient solder, Lifted lead, Lifted chip, and Fillet defect.
Categories
Each defect name can be arranged freely by system function
Inspection Method
After image collection by line sensor camera, inspect stored images in memory
TopLight image (monochrome), SideLight image (full-color), LowLight image (monochrome)
Inspection Image
Possible to arrange various images by editing Top, Side, and LowLight images
Data Import Either from CAD data or NC data
Shape
Fiducial Mark Recognition Method
Offset Calculation
Tact time is calculated by adding shading time, image scanning time, table moving time,
and calculating time. (*1) (*2)
Tact Time
Tact Time
Image Scanning Time
Calculating Time
Pre-Scan Function 2nd PCB can be processed while reviewing 1st PCB inspection result
Inspection Result Screen display of defect locations, File output of defect details,
Output Image output of defective area, Network output of the above files
Data Counting List display of worst 20 defects, histogram display, File output of HTML-format spreadsheet.
Recognizing Ability OCR function, 1D barcode, 2D barcode (*5)
Barcode Output
Printing is available in CODE39 format from the journal printer of the optional items (*6)
Function
(*1) In case the inspection data is heavier, the tact time becomes longer. The timing of inspection
NOTE
starts from when table returning.
(*2) Calculating time is for reference purpose only.
(*3) If PCBA size is smaller than 460 (W) × 500 (L) mm, image scanning time will be shorter than
these values.
(*4) Calculating time depends on inspection algorithm.
(*5) Recognizing ability of 2D barcode is optional.
(*6) As the output of CODE39 barcode, the fonts provided complimentary by Technical Corp. are used.
URL: http://www.technical.or.jp/handbook/chapter-font1.html
Operating System
Inspection Software Language
Circle, Square, Triangle, Rhomboid
Centroid computation, Circumscribed quadrangle
Two-points
Approximately 18 sec. for 460 (W) x 500 (L) mm
(18.11 W x 19.69 L in.) size PCB
Approximately 10 sec. (*3)
Approximately 3 sec./10,000 inspection windows (*4)
Table 1-2 Inspection Specifications
Microsoft Windows XP Professional English version
English or Japanese can be chosen before shipment
Table 1-3 Software Specifications
Specification/Customer Support
BF-Sirius
IV-3