Adjustment, Replacement, And Setting Of Main Parts; Sensor Adjustment; Type A: Dog Sensor; Type B: Reflective Board Sensor - SAKI BF-Sirius Manual

2 Adjustment, Replacement, and Setting of Main Parts

This chapter describes adjustment, replacement, and setting of main parts.
Be careful safety to do the work into inspection machine.
If a maintenance is required, please contact Saki Corporation.
WARNING
CAUTION For detail units positions, refer to 2.2 Name and Function of Each Unit in Operation Manual.

2.1 Sensor Adjustment

2.1.1 Type A: Dog Sensor

Dog sensor does not need to adjustment. It adjusted appropriate position at the shipment.
Detect
Sensor Type
Type A

2.1.2 Type B: Reflective Board Sensor

Loosen the two M4 cap screws which fixes sensor bracket and adjust the position to detect PCBs.
No.
SR01 Scan Origin Sensor
SR02 Front Scan Limit Sensor
SR03 Board Sensor
SR04 Scan Start Sensor
SR05 Rear Scan Limit Sensor
SA01 Fiberoptic Sensor Amplifier
Table 2-1
Adjust Origin or
Limit Position
Table 2-2
FFFure 2-1
Name Sensor Type
Type A
Type B
Type A
Type C
Sensor Type
ON
DoF Sensor
Reflective Board Sensor
Maintenance Manual
OFF
BF-Sirius
II-13