SAKI BF-Sirius Manual page 32

Operation Manual
Item
Rack Count : A / Total B
Inspected Num
Current
NG Window Num : C / Total D
Revised Window : E /
Not Revised F
NG Parts Num G / Total H
Reference Name : I-J
Inspected on
Group Name
Board Name
Repaired by
NOTE
Item
Macro Code
NG Type : K [L]
Idle Count
REPAIR
OK
Prev NG / Next NG
Prev / Next
NG Component
OK Component
Show Pattern
All Windows
Window
Drop down list under Window
QuFt
Step4: After all the judgements are finished, the dialog shown in Figure 3-38 appears. Press
Edit NG Component Data dialog closes and the next judgement is available.
NOTE
BF-Sirius
I-26
Indicates the specified number of total NG files (B) and which number in
the rack the NG PCB currently inspected (A). (*1)
Indicates the total number of PCBs that has been inspected by AOI machine.
Indicates the total number of PCBs that are judged as NG by AOI machine.
Indicates the total number (D) of NG spots on the currently-inspecting
PCB and what number (C) NG is displayed.
Indicates how many (E) NG spots were reviewed by operator and how
many are remaining (F).
Indicates the total number (H) of NG components on the currently-
inspecting PCB and what number (G) NG component is displayed.
Name of the component shown in image (A) at present. The number in
the square brackets is a lead number, such as in the case of an IC.
Time when the PCB was inspected.
Name of the group to which the PCB being inspected belongs.
Name of the PCB being inspected.
Name of the operator who makes judgements.
Table 3-4 Explanation of the Area C Items
(*1) The number of the NG PCBs stored in one rack can be specified in Auto Mode Setup >
Make NG files(refer to Table 3-3 Explanation on Each Item for Auto Mode Setup).
Indicates the component name.
Indicates the defect type (K) of the component shown in the upper right
image, and the test result (L).
Indicates the number of NG PCBs waiting for judgement, which were
scanned while judging certain PCB.
Press if the inspection result is NG and the PCB is indeed defective.
Press if the inspection result is NG but the PCB is good.
Jumps to the non-judged component.
Moves to the previous or next defective spot.
Designates NG to all the inspection items of the same component at once.
Designates OK to all the inspection items of the same component at once.
Displays the image of the first window in library registration on the upper
right of the Defective window.
Displays all windows for that component not only the window for
defective spot on the upper right window.
Displays only the defective spot windows.
Allows user to change the defect type.
Close Edit NG Component Data dialog.
Table 3-5 Explanation of the Area D Items
FFFure 3-38
If the next PCB image was already scanned during the judgement and the result of the
PCB was NG, Edit NG Component Data dialog for the next PCB appears after pressing
OK.
Description
Description
Inspect
OK.