System Shutdown; Quit The Inspection Software - SAKI BF-Sirius Manual

Operation Manual

3.3 System Shutdown

3.3.1 Quit the Inspection Software

Step1: Select
pressing
CAUTION
Step2: The dialog shown in Figure 3-11 appears.
OK
Cancel
Step3: The dialog shown in Figure 3-12 appears.
For default setting, save the inspection data into D:\BF1\BF1DATA.
To save another destination, check Change destination to save inspection data and
specify the directory to save.
NOTE
BF-Sirius
I-12
File > Quit from the menu-bar. The same operation can also be performed by
+ .
Ctrl Q
In auto mode, press Stop from the menu-bar to return to the manual mode.
Press if you backup the data in E: drive.
Press if you do not prefer to backup the data in E: drive.
FFFure 3-11
Recommend to save the inspection data either make the new data or modify the data.
FFFure 3-12
FFFure 3-10 QuFt
Backup Confirmation
Save Inspection Data